Boeing confirmed that F&R and ETOPS testing will start in early June. Earlier I had reported a June 9th start date and that date looks to be solid. Functionality and reliability testing will test the aircraft as if it is in a commercial airline environment with simulating failures and other problems to see how the 787 will handle it. The test airplanes will be used but critical to this testing will be the use of ZA102, the ninth 787 built and recently re-worked to full production standard with all the necessary change incorporation modifications that were needed. This is the standard that all production 787 in which all will be delivered. So far the Rolls Royce powered 787s have completed 96% of required testing and the GEnx powered 787s are done with 75% of testing.
The FAA must issue an amended type inspection authorization (TIA) before Boeing can start F&R and ETOPs testing but that should happen soon. Thus far, of the 4,200 deliverables that needs to be completed for type certification of the Rolls powered 787, less than 150 remain to be done and of those less than 40 need to be submitted to the FAA directly. ETOPs certification will be accomplished on test points that need to be run and not the number of flight hours. Those test points will be run during the 300 hours needed for F&R testing thus both tasks will be tested concurrently.
As this required testing draws to a close, Boeing will send ZA002 during the week of July 4th to Japan for service ready validation operations (SRVO) where the airplane will be inducted into ANA's operations. This testing is to ensure that the 787 is ready for life as a passenger carrier and not a test airplane. ANA and Boeing will conduct fit checks with maintenance stands and jacks within the hangar, ground servicing operations, refueling and maintenance activities, as well as simulate operations between initial city pairs that ANA will fly the airplane on like Tokyo, Osaka, and Hiroshima. Read Boeing's statement:
Boeing and ANA to Conduct 787 Service Readiness Validation in Japan
-The first time the 787 will fly to Asia and Japan
TOKYO, May 26, 2011 /PRNewswire/ -- Boeing [NYSE: BA] and ANA today announced how the two companies will work together to help prove the 787 Dreamliner's readiness to enter service on a commercial basis. Using the second flight test aircraft, known as ZA002, they will simulate in-service operations across several airports in Japan in a service ready operational validation. The validation is expected to take place the week of July 4. Anticipated city pairs include trips between Haneda Airport in Tokyo and airports in Osaka (Itami and Kansai), Okayama and Hiroshima.
This will be the 787's maiden appearance in Japan. ANA is the launch customer for the aircraft and has 55 Dreamliners on order. The 787, which will be deployed across the ANA route network, is an integral part of ANA's strategy to strengthen its position and support its growth and expansion plans.
"ANA is eager to introduce the innovative 787 Dreamliner to Japan," said Shinichiro Ito, ANA president and chief executive officer. "Giving our employees the opportunity to gain experience with the airplane will help ensure a smoother entry into service later this year."
"We've put the airplane through its paces in a rigorous flight test program," said Scott Fancher, vice president and general manager of the 787 program. "Now, as we get closer to first delivery, we'll prove out its capabilities and reliability in a revenue-like environment."
ANA's maintenance crews also will practice maintenance and servicing of the 787 during the validation. This will include typical ground servicing activities, fit checks of airplane jacks and maintenance hangar stands, towing and refueling the airplane, and other routine maintenance operations. Watch this video to see how Boeing and ANA are planning for the validation.
Similar service ready validations have been conducted with great success on previous Boeing programs, including the 777, 737NG and 757-300.
Boeing plans to deliver the first 787 to ANA in the August to September timeframe.
After SRVO is completed along with ETOPs and F&R , Boeing will submit PSOC (program statement of compliance) which will allows the FAA to rule on type certification for the 787 and allow Boeing to deliver in August/September. My gut feeling is we can see first delivery around mid to late August after ETOPs and F&R testing is completed in mid to late July.
There was no word on testing for the GEnx powered 787 though Boeing is completed with 75% of testing. Boeing still has to announce when F&R and and ETOPs testing will start on ZA005 and ZA006 but I anticipate that Boeing will have to have on production GEnx powered 787 ready to support that testing. It could be ZA177 which is the 23rd 787 built and destined for Japan Airlines. It is currently undergoing rework and change incorporation at Lackland Air Force Base in Texas. Still I would not completely rule out a production plane straight off the assembly line especially if it require very little work to get it ready for flight. Considering that carriers such as JAL, Air India and China Southern have ordered the GEnx-1B, Boeig will be under pressure
to finish up certification activities for the GEnx powered model. I wouldn't expect first delivery to JAL until October at the earliest. GE has received more orders for it's GEnx-1B engines to power the 787 than Rolls Royce has for the Trent 1000 engines.
Like the 787, the 747-8F is also nearing the end of its certification tests. It still has to conduct F&R testing and the the start of this testing is dependent on the FAA signing off on part of the Honeywell design flight management software and its readiness to conduct F&R testing. Still according to Guy Norris Boeing expects the start F&R testing around the end of May. To signify how far 747 testing has come, Boeing has sent one 747 test airplanes to Lackland AFB to undergo change incorporation and preparations for delivery. RC503 has been at Lackland AFB since May 13th for the required rework. Flight testing on the 747-8I continues and is currently well over 200 flight test hours between the two flight test aircraft. Boeing has said that the flight test program for the 747-8I will be about 600 flight test hour thus this program is already more than one third of the way through the flight testing hours that is needed.
Boeing also addressed production rates at the conference. Currently, production of the 787 is at two per month. Interestingly, James Bell, Boeing CFO said that Boeing would have built 40 production standard 787s by the time the first one is delivered to ANA. Given that Boeing has just started work on the 35th production standard 787 and at the current pace of 2 per month, Boeing should be at number 40 around August. Boeing is being extremely cautious when it comes to increasing production rates, especially on the 787. They have stated that until they know that they can handle the next production increase without travelled work the rate won't increase. That said they are saying that the 787 production increase to 2.5 per month is expected to start later this summer (August/September in my opinion). Additionally Boeing North Charleston will come one line in July with the first 787 for United Airlines to be loaded in the tooling jig. With all the problems that Boeing has had with the production system, Boeing has indicated t hat they are prepared to move production of the horizontal stabilizer for the 787-9 from Alenia and back in house within Boeing at Seattle. This was in many way not unexpected given Alenia's performance on the HTP for the 787-8. However, Boeing may need to negotiate the move of that work from Italy to Seattle with Alenia as it is Alenia that owns the design though it is unclear if the current agreement between the two firms extended to the 787-9. This tale (pun intended) is not over.Future 787 Variants
Boeing has always left the option of building variants of the 787 including the larger 787-10 (now known as the 787-10X). During the conference Boeing, while not outright launching the 787-10X has given strong indications that they intend to do so. They plan on a stretch of about 6m which would accommodate an additional 43 passengers over the 787-9 which can carry 290 passengers. This would squarely put it in competition with the A350-900 and can possibly be seen as a replacement for the 777-200 and possibly the 777-200ER. The expected range is going to be less than that of the 787-9 due to keeping the same wing as the -9 variant. James Albaugh, head of BCA said of the -10X, "I believe this will be an airplane we will probably do."